Bid History for 2011 Stratasys Fortus 400mc 3D Production System
Auction Start Date: 10/07/19 12:03 PM ET
Auction End Date: 10/10/19 12:06 PM ET
Asset ID: 152 Number of Bids: 1
Loading bid history...
Up for sale is a 2011 Stratasys Fortus 400mc 3D Production System. Fused Deposition Modeler
Was used by Oregon State University and no longer needed. Unit is being replaced with a smaller unit.
In full working order.
The Nominal AC Line Voltage requirements of your T-Class system are 230 VAC 3-Phase ± 5%, frequency of 46 Hz to 65 Hz stable, phase balance ± 3%, and a 20 amp circuit. Operation of your system outside this range, even for short periods, is not recommended, as it will result in degraded system performance and component life expectancy. The ideal output voltage from the transformer is 230 VAC to 235 VAC.
Heat Output 12,000 BTU/hr - Max.
Compressed Air - 55 psi with a minimum flow of 2.5 CFM. The maximum pressure must be less than 145 psi Maximum temperature of operating environment: 85°F (29°C) Maximum dew point: 78°F (25°C)
Space Requirements Side Clearance: 30 inches (76.29 cm) on each side Rear Clearance: 12 inches (30.28 cm) Front Clearance: 36 inches (91.44 cm) Vertical Clearance: 28 inches (71.12 cm)
Dimentions: Width: 50.5 inches (128 cm) Depth: 35.25 inches (89.64 cm) Height: 77.25 inches (195.63 cm) Weight: 1,309 lbs.
Included: Transformer any extra parts Manuals 3D product
Forklift available and loading dock.
The final maintenance on the unit is scheduled in a few weeks.
Please see pictures for additional description. Defects not shown/known/listed may exist.
Additional Spec.'s may be available, for further information please call or send us a message and we will find what we can.
Pre-bidding inspection is welcomed and encouraged. To make viewing arrangements please contact us at 541-737-7347. If shipping is required it is up to the winning bidder to make all necessary arrangements within 7 days of End of Auction.
|Questions and Answers|
Q: Hello, do you know what materials are "turned on" or optioned for this machine? Do you know how many hours are on it? When (if ever) was the head rebuilt?
thanks! (9/26/19 7:29 PM)
A: Materials: ABS-M30i, ASA, PC, ULTEM 9085 Hours: Estimated – 1000hrs. We do not track total hours. Head: Never rebuilt. Full 2-yr maintenance just completed. Gantry system was replaced. Machine has had service contract throughout life and received yearly service from Stratasys. (9/27/19 1:18 PM)
|Pre-bidding inspection is recommended and encouraged. Please call 541-737-7347 to make an appointment for viewing auction items.|
If payment has not been received within seven (7) business days of the end of the auction the seller reserves the right to relist the property for sale.
Buyer is responsible for paying processing charges, buyer premium, shipping and/or insurance charges when necessary or applicable.
OSU accepts cash, personal checks up to $1000, cashier checks, money orders, certified checks, company checks, and Visa or MasterCard’s. If the check is in the amount of $1,000.00 or less it must be accompanied by two pieces of acceptable identification, one of which is photographic.
Please call 541-734-7347 to pay with credit card.
Checks should be made out to OSU Surplus and mailed to:
OSU Property Services 644 SW 13th Street Corvallis, OR 97333
The winning bidder has ten(10) business days from the end of the auction to remove their item(s) or the item is considered abandoned and the ownership of said property reverts back to OSU.
No shipping is offered. If shipping is required it is up to the winning bidder to make all necessary arrangements.
|OSU reserves the right to accept or reject any and all bids and to sell any part or all of the offered property to OSU departments, state and local governments, and nonprofit organizations with a 501(c)(3)status prior to the end of the sale.
OSU makes no warranty expressed or implied as to the quality, weight, size or description of any of the property or its fitness of any use or purpose. All sales are final, no refunds. All property is offered for sale “as is, where is, with no guarantee”.
Defects not listed/shown/known may exist.
Returns are not accepted EXCEPT if the auction description does not match the actual item. The seller reserves the right to make that determination.